One ear does not work in the headphones 🥝 why the headphones do not work

Music lovers have repeatedly encountered problems that are caused by malfunctions in the playback device, they stop working, the right earphone stops working or the left one does not work. And iPhone headphones are no exception. Most users took the headphones to the service more than once or got rid of the “broken” bundle of wires. Over time, it becomes boring to spend money on repairing and purchasing new headphones, and the user puzzles himself with the question: “Is it possible to fix or fix an idle device on my own?” You can, even like that. There are many ways to “revive” a dead device without resorting to paid technical services. This article will demonstrate this to you with useful instructions on how to fix headphones if one ear doesn’t work, the bluetooth earphone is broken, the wireless, large and droplets no longer work and music no longer plays on them, and with other problems with the device. You are interested in the reasons why the second earphone breaks?

to contents ↑

Headphone Repair

Before you repair the headphones without a soldering iron or with it, you need to get acquainted with the problem itself. What can be encountered when operating such devices?

There are a number of problems that can most often be solved independently:

  • Ground wire.
  • The inoperability of one of the headphones.
  • Wheezing, interference and other foreign sounds.

Important! Each owner smartphone It is faced with the fact that dust enters the headphone jack, and therefore the quality of music playback starts to “lame”. In order for the sounds emitted by the headphones to be clean and without interruptions, we suggest that you familiarize yourself with our next article “How to clean the headphone jack on the phone?”.

to contents ↑

With soldering iron

The most common problem is abrasions in the places of excesses. In this case, the wire will have to be cut, cleaned and soldered.

Important! Such an activity requires basic skills and knowledge of basic safety precautions.

For this method, you will need:

  • Soldering iron.
  • Tin.
  • Nippers or pliers.
  • Multimeter (if you intend to ring the device to detect damage).
  • A spare plug or socket if the functionality of these components in your headphones is impaired.
  • Glue and scissors. The glue must be flexible for the plug of the device, and also dry quickly.
  • In some cases, the shrink tubing does not interfere.

If you were soldering, then it makes no sense to speak further, but for beginners we will take a short course:

  1. First you have to get rid of the insulation at the point of damage.
  2. Then you should ring the wires for a defect with a multimeter.
  3. Now you need to arm yourself with a soldering iron and tin to solder the defective area. Glue everything with special glue and return the insulation to its place.
  4. If you managed to avoid short-circuit (short circuits) and other things that radio amateurs encounter, you can safely use the “brand new” headphones.

Important! Do not rush to grab the soldering iron if you have not found any damage. Perhaps the problem lies in the input of the playback device itself, and the headphones do not need to be repaired.

to contents ↑

No soldering iron

How to fix the headphones if the wire is broken, but the sound continues to work stably? Here the heat shrink tube, which we mentioned in the previous paragraph, is useful to us.

To put the insulation in order, you will need:

  1. Using scissors, cut off the required number of tubes corresponding to the size of the defect to be coated.
  2. Put this piece on the part of the wire that is damaged.
  3. Hold the flame a little from the lighter, blowtorch, gas or electric burner of the stove.
  4. From such actions, the handset will settle, reliably protecting your headphones.

Important! Be careful when firing the thermotube. Do not bring items close to fire. Such actions may cause fire.

Such methods will help repair a broken device and even extend its life. But it is worth focusing on the frequent cases of breakdowns of devices.

to contents ↑

One earphone does not work. What to do?

If there is such a problem that your device only works “half”, we recommend that you immediately take up the multimeter and conduct testing by checking the wires with this device. The characteristic sound that the equipment makes will inform you that the circuit is not broken. If the work is accompanied by silence, we can conclude that the problem lies precisely in this place.

How to identify a problem:

  1. Make two cuts near the plug and speaker.
  2. You will see a protective winding in front of you, which must be carefully removed.
  3. A measuring instrument will help you verify the integrity of the wire. If you use a multimeter as a measuring device, then you need to position the probes (black and red) in the places of the cut. A characteristic squeak will indicate that the wires are intact.
  4. If the device does not stop emitting a signal, you need to make another cut, located between the first two. Repeat these steps until the meter finds a breakdown.
  5. If the “silence” was not found, the problem is not in the cable. And if the problem area was discovered, take a soldering iron in our hands and recall the item “Repairing headphones with a soldering iron”.

to contents ↑

Headphones with adjustable sound or / and microphone

How to repair the headphones at home, if they are equipped with sound control and a microphone? Such headphones are not very different from others, but you need to have an idea about the operation of the microphone button or its regulator.

Damage is the same as in the previous examples. Sometimes the wire may just stretch.

Important! Such a defect can be identified with your fingers, because you will feel the place in which the wire is reduced in thickness.

To solve this problem, you can follow these instructions:

  1. Strip the wires by holding them above the flame.
  2. Tin the ends of the wire and solder them.
  3. You can use the cambric for added protection against external influences by simply placing it in place of the weld.

If you still couldn’t reanimate the headphones and there was a need to purchase new ones, go to the direct link and view our prepared ranking of the best manufacturers of headphones

Other problems:

  • It happens that the microphone begins to transmit sound poorly. To get rid of this problem, disassemble the microphone and wipe its head with alcohol. Try to avoid getting any foreign particles inside the structure.
  • Some users experience damage to the membrane of the device. This problem is solved by mechanical action on the membrane. Just give it its original “position." This method is true, but will briefly return the device to its original operating state.

Important! We recommend resorting to replacing this component by analogy with plugs and other components.

to contents ↑

Stock footage

Obviously, special difficulties in self-repair should not arise.Such manipulations with accessories will help not only return to working condition, but also significantly extend their service life.

1 star2 stars3 stars4 stars5 stars (No ratings yet)
Loading...

Report typo

Text to be sent to our editors:

Adblock detector

Wardrobe

Electronics

Wash